Valves
We hold expertise in manufacturing of a wide range of Valves that are used to perform important functions like preventing backflow, controlling speed of cylinder, keeping pressure under control and others. Our process expertise includes delivering valves on the basis of functions performed. The range that can be offered by us include Angle Valves, Ball Valves, Butterfly Valves, Check Valves, Control Valves, Gate Valves, Globe Valves, Manifold Valves, Needle Valves, Pressure Relief Valve, Y-Strainer and others.
|
Y-Strainer
 |
Y-Strainer valves offered by us are special devices, used for mechanically removing solids from flowing liquids/ gases by using perforated/ wire mesh straining element or equipment. These strainers find extensive usage in pipelines to protect equipment like pumps, meters, control valves, steam traps & regulators.
Usage:
- Generally used where amount of material to be removed is small
- Where frequent straining is not needed
- For handling steam as these can handle high pressures
Installation:
- Can be installed in both horizontal as well as vertical position
Material Finish:
- Cast iron
- Bronze
- Carbon steel
- Stainless steel
Send Your Enquiry |
Pressure Relief Valve
Pressure relief valves offered by us are devices mounted on hot water heater/ boilers. These are designed to release any high steam pressure in tank and thus prevent possible tank explosions. Their precision designs makes them used for systems that contain gases & liquids including a variety of pneumatic, hydraulic & cryogenic applications.
Features:
- Provides protection from over-pressure in steam, gas, air & liquid lines
Working:
- Installed to prevent over pressurization of system
- Helps in letting off steam when safe pressure level is exceeded
- Valve is closed after pressure level drops to preset level
- Back pressure regulating valve helps in maintaining upstream pressure at desired level by allowing excess upstream pressure to flow downstream
Application Areas:
- Petrochemicals
- Pneumatic equipments
- Hydrocarbons
- Chemical Processing
Send Your Enquiry |
|
Needle Valves
|
Needle valves offered by us work as throttle valves and are similar in operations and designing as globe valves. Having a slender, tapered point at end of the valve, these valves are used to control flow into delicate gauges that might be damaged by sudden surge of fluid under high pressure. Further, it also helps in controlling end of a work cycle.
Material Finish:
- Stainless steel
- Bronze
- Cast iron
The finish depends on the kind of application these are used in.
End Connections:
These valves are available in different types of end connections including:
- Double ferrule type
- NPT
- BSPT
Send Your Enquiry |
Manifold Valves
Gate Valves
|
Gate valves offered by us are also known as Slide or Knife Valves. Named after wedge-shaped internal plastic barrier, these linear motion valves feature flat closure element that slides into flow stream to provide shut off. Further, these are designed to minimize pressure drop across valve in fully opened position and stop flow of fluid completely.
Features:
- Effectively regulate flow rates from zero to full flow
- Work well with solids-laden water
- Work well in applications involving slurries as 'gates' can cut through slurry
These valves are also advantageous in applications that involve viscous liquids like heavy oils, varnish and molasses .
Send Your Enquiry |
Control Valves
Check Valves
|
Check valve offered by us are mechanical devices used as industrial/plumbing fitting. These are precision designed to allow fluid/ gas to flow through it in uni-direction. The offered check valves also prevent back flow and keep potentially contaminated water from siphoning back.
Types of Check Valves
Single Disc Swing Valves:
- Can be mounted both vertically & horizontally
- Designed with closure element attached to top of the cap
- Closure element can be pushed aside by flow, but swings back into close position upon flow reversal
- Double Disc or Wafer Check Valves:
- Consist of two half-circle disks hinged together that fold together upon positive flow
- These retract to full-circle to close against reverse flow
Lift-Check Valves:
- These valves can operate in either vertical/ horizontal mounting
Silent valves:
- Valves with center guide extending from inlet to outlet ports
Ball-Check Valves:
- Can even handle fluids that produce gummy deposits
Cone Check Valves:
- These valves use free-floating/ spring loaded cone resting in seat ring as the closure element
Applications:
- Offshore Oil and Gas
- Civil Engineering
- Gas-Turbine Systems
Send Your Enquiry |
Globe Valves
Butterfly Valves
|
We offer clients Butterfly valves that work as throttling valves and are used to effectively control flow through circular disc by turning valve's main axis at ninety degree towards the direction of flow in the pipe. These valves use inflatable seat to seal with air pressure, thus requiring less torque & smaller actuator, resulting in lower overall valve costs.
Features:
- Provide precise, repeatable control for industrial process
- Feature complex automatic sequencing for process control
- Help in controlling flow of gas/ liquid by means of a disk
- Permits flow in a single direction
- Offer rotary system movement of less than 90 degree
- Manufactured in materials like stainless steel, plastic, ceramic and PVC
Send Your Enquiry |
|
Products
Showcase
View all our products / services as a slide show.
Play Now
|
